Rugged RTCA / DO-160G Helicopter Hoist and Lift Camera for military and civilian applications.

Introduction

Bad Wolf Technologies llc is proud to introduce a brand-new hoist and lift camera. This rugged helicopter hoist and lift camera handles vibration, shock, freshwater spray, saltwater spray and submersion with ease (3rd party laboratory reports are available upon request).

Power Supply / Assembly

The new helicopter hoist camera has the Bad Wolf Technologies 2nd generation Class 3 aviation and shipborne power supply. The new “Class 3 assembly with traceability” power supply is designed to meet rigorous RFI, EMI and environmental requirements found in military and civilian aviation and marine applications. Our Aviation Hoist and Lift Camera was laboratory tested in a government approved facility to RTCS / DO-160G EMI/RFI and environmental requirements.

Installation

Bad Wolf Tech hoist and lift camera installs in Sikorsky S92 helicopters without a need to change the existing camera mount or camera wiring harness. And while this camera was designed for rotorcraft (helicopter) it may be used in any fixed wing aircraft (plane).

For more details, on the Bad Wolf Technologies RTCA / DO-160 hoist and lift camera, please call or email our sales department for the datasheet.

Features (abridged)

  • RTCA / DO-160G certification
  • 1.3 Megapixel 1/3.2” CMOS Sony Starvis IMX017 image sensor SoC System on a Chip
  • Eyenix DSP(ISP) Digital Signal Processor
  • High Resolution, 1000 TVL CVBS (1080p30/p60 HDSDI optional)
  • Waterproof housing to protect electronics & optics
  • Lightweight, entire assembly is < 1lbs
  • Materials used to withstand Saltwater environment
  • Fog Proof Lens Cavity – nitrogen purged
  • Camera continuous operation, -40°C to +55°C (qualified IAW customer requirements. Capable of -40°C to +85°C operation)
  • Factory order option for Sikorsky S92. Install without modification to existing camera mount.
  • Use for rotorcraft hoist and lift camera, SAR, Flight Testing, cockpit and passenger compartment monitoring, cargo hold remote viewing and many more …
  • Wide operating range
  • Specifically designed as an aviation / helicopter (rotorcraft) / fixed wing (aircraft) camera

How to order

Please use the part number(s) below when ordering the Bad Wolf Technologies Helicopter Hoist Camera:

  • BW-CAM-VQSR-NTSC
  • BW-CAM-VQSR-PAL
  • BW-CAM-VQSR-HD [with CVBS NTSC or PAL and High-Definition 3G/HD-SDI video outputs]

Hoist and Lift Camera by Bad Wolf Technologies


Please use the part number(s) below when ordering the Bad Wolf Technologies Helicopter Hoist and Lift Camera:

  • BW-CAM-VQSR-NTSC
  • BW-CAM-VQSR-PAL
  • BW-CAM-VQSR-HD [with CVBS NTSC or PAL and High-Definition 3G/HD-SDI video outputs]
RTCA / DO-160G hoist and lift camera for aviation

Bad Wolf Technologies Helicopter Hoist and Lift Camera

Bad Wolf Technologies llc is proud to introduce a brand-new hoist camera. This rugged hoist cam handles vibration, shock, fresh & saltwater spray and submersion with ease. It has Bad Wolf Technologies 2nd generation aviation and shipborne power supply. The new Class 3 power supply is designed to meet rigorous RFI/EMI and environmental requirements found in military and civilian aviation and marine applications.

Qualifications

Tested to DO-160G EMI/RFI and environmental requirements. Bad Wolf Technologies hoist and lift camera installs in Sikorsky S92 helicopters without a need to change the existing camera mount or camera wiring harness.

Highlights

*1.3 Megapixel 1/3.2” CMOS Sony Starvis IMX017 image sensor SoC System on a Chip
*Eyenix DSP(ISP) Digital Signal Processor
*Resolution, 1000 TVL (CVBS)
*HD or SD (or both) at no additional cost
*Waterproof housing to protect electronics & optics
*Materials used to withstand Saltwater environment
*Lightweight, entire assembly is < 1lbs *Fog Proof Lens Cavity – nitrogen purged
*Camera continuous operation, -40°C to +55°C (qualified IAW customer requirements. Capable of -40°C to +85°C operation)

DATASHEET